CTIA GROUP’S tungsten carbide safety hammer heads can be divided into categories such as outdoor emergency type, industrial processing type and material testing type, according to different applications. This division is based on the matching relationship between material wear resistance, toughness and impact resistance and actual working conditions, aiming to help understand the performance differences of different types.
CTIA GROUP and its parent company, CHINATUNGSTEN ONLINE, have been dedicated to the tungsten-molybdenum products industry for nearly 30 years. They specialize in providing flexible, customized global services for tungsten-molybdenum products, designing, manufacturing, and precisely processing various standard specifications, grades, and dimensional precision according to customer requirements, suitable for a wide range of applications. For more information on tungsten carbide, please visit the website: http://www.tungsten-carbide.com.cn/index.html. If you require tungsten carbide, please contact CTIA GROUP: sales@chinatungsten.com, 0592-5129595.
I. Outdoor emergency type tungsten carbide safety hammer heads
Outdoor emergency type tungsten carbide safety hammer heads mainly target the glass breaking needs in emergency situations such as vehicles being trapped. The operating end is usually designed with a sharp conical or pointed structure to concentrate force on the surface of tempered glass or laminated glass. The typical grade adopts the YG6 or YG8 series, with the cobalt content controlled at around 6% to 8%. This structure endows it with high hardness and good wear resistance, suitable for quickly breaking the glass for escape or rescue operations.
II. Industrial processing type tungsten carbide safety hammer heads
Industrial processing type tungsten carbide safety hammer heads are widely used in stone processing, geological prospecting, and occasions where hard brittle materials such as rock and concrete are broken and perforated. The connection method between the tip and the base is mainly integral or composite, with common grades including YG8C and other coarse crystal structures, cobalt content about 8%, hardness about 89 to 90HRA, and flexural strength above 2000MPa. This safety hammer head has better impact resistance and wear resistance in high-frequency hammer striking environments, suitable for working scenarios that require greater force.
III. Material testing type tungsten carbide safety hammer heads
Material testing type tungsten carbide safety hammer heads are mainly used for on-site testing of strength, cracks and density indicators of building, bridge or engineering structure materials. The design mostly adopts a lightweight and easy-to-carry integral structure, with the operating end mainly round head or flat head, suitable for tapping the inspected surface to observe material response. The grade selection is relatively flexible, and fine crystal structure such as YG6 can be adopted to balance lightness and wear resistance. This type of safety hammer head demonstrates good stability and repeatability in the testing process, suitable for on-site evaluation work with low precision requirements.
